RatSport |
Boot Racks for Convertibles
The table below is by no means a comprehensive fitment guide, just a brief list of what vehicles we have already found that suit our bootracks. If your vehicle is not listed then please measure your bootlid and compare its size with the sizes of our racks as listed in the 2nd table.
Vehicle |
Bootrack Part No (Alternate numbers indicates choice is possible) |
Alfa Romeo GTV | CBR1190 |
Alfa Romeo Spider | CBR1190 |
Audi 80 | CBR9004 |
Audi A4 Series 4 | CBR9011 |
Audi TT All Models | CBR9005 |
Austin A30 | CBR1045 / CBR1044 / CBR1151 |
Austin Healey 3000 | CBR1045 / CBR1044 / CBR1151 |
BMW 3/5/7 Series All Years | CBR9011 |
BMW Z3 | CBR9011 |
Fiat Barchetta | CBR1045 / CBR1044 / CBR1151 / CBR1150 |
Honda S2000 | CBR1190 |
Honda S600 , S800 | CBR1190 |
Jaguar XKR & XK8 | CBR9011 |
Jaguar XJ8 | CBR9011 |
Lotus Elan, Elise Classic Models | CBR9005 |
Lotus Elise S1 Modern Model | CBR9005 |
Mazda MX5 Mk1 Mk2 | CBR1045 / CBR1044 / CBR1151 / CBR1150 |
Mazda MX5 MK3 (NC) Suits Manual (not power) roof only | CBR9004 |
Mercedes CLK | CBR9011 |
Mercedes SLK to 1996 | CBR9004 |
Mercedes SLK 1996 Onwards | CBR9011 |
Mercedes SL to 2002 | CBR1190 |
MG Midget | CBR9005 |
MGB | CBR9004 / CBR1045 / CBR1044 / CBR1151 / CBR1150 |
Morris Minor | CBR1045 / CBR1044 / CBR1151 / CBR1150 |
Nissan 350 | CBR9011 |
Nissan Figaro | CBR1190 / CBR1045 / CBR1044 / CBR1151 / |
Peugeot 206 | CBR1045 / CBR1044 / CBR1151 / CBR1150 |
Peugeot 306 | CBR9011 |
Porsche 944 | CBR1045 / CBR1044 / CBR1151 / CBR1150 |
Porsche Boxster | CBR9005 |
Renault Megane | CBR1190 |
Rover MGF | CBR1045 / CBR1044 / CBR1151 / CBR1150 |
Rover MG TF | CBR1190 / CBR1045 / CBR1044 / CBR1151 / CBR1150 |
Saab 900 | CBR1190 |
Smart Roadster | CBR9011 |
Toyota MR2 Mk1 | CBR1190 |
Toyota MR2 from 2000 | CBR1190 |
Triumph Herald & Vitesse | CBR9004 / CBR9005 |
Triumph Spitfire | CBR1045 / CBR1044 / CBR1151 / CBR9005 |
Triumph Stag | CBR1045 / CBR1044 / CBR1151 / CBR9005 |
Triumph TR2,3,6 | CBR9004 |
Triumph TR4,5 | CBR1190 |
Triumph TR7 | CBR1045 / CBR1044 / CBR1151 / CBR9005 |
Vauxhall Astra | CBR9011 |
Vauxhall Cresta | CBR1045 / CBR1044 / CBR1151 / CBR9005 |
Volvo C70 | CBR9011 |
VW Karmann Ghia MK2 | CBR1045 / CBR1044 / CBR1151 / CBR9005 |
Part Number | Dimensions (Length x Width x Height in cm) | Description |
CBR1045 | 88 x 46 x 11 | Alloy |
CBR1044 | 88 x 46 x 11 | Alloy - Wood Slats |
CBR1151 | 88 x 46 x 11 | Stainless Steel |
CBR1150 | 88 x 46 x 11 | Stainless Steel - Wood Slats |
CBR9005 | 70 X 40 X 7 | Stainless Mille Miglia 5 bar |
CBR9004 | 78 X 40 X 7 | Stainless Mille Miglia 6 bar |
CBR1190 | 89 X 40 X 7 | Stainless Mille Miglia 7 bar |
CBR9011 | 89 X 32 X 7 | Stainless Narrow Fit |
CBRFKA | Alloy Rack Kit | |
CBRFKS | Stainless Rack Kit |
All our bootracks are supplied with fitting kits which enable them to clamp onto the sides of the bootlid (clamps are powder coated & lacquered to prevent scratching bootlid), and rubber suckers for the feet. Fitting and removing takes under 2 minutes and requires a 9mm spanner. Alternatively they can be fitted permanently by drilling 4 holes through the bootlid and bolting into the internally threaded legs of the rack. All our racks are supplied with fittings, however we also supply fitting kits separately for anyone who has purchased a rack elsewhere supplied without fittings
Our alloy racks hold up to 31kg and our stainless racks hold up to 66kg
Click pics to enlarge
CBR1045 |
CBR1044
|
CBR1151 |
CBR1150 |
CBR9005 |
CBR9004 |
CBR1190 |
CBR9011 |
|
Photos below show Mazda MX5 with bootrack fitted with temporary fitting kit in 1st and permanently mounted in 2nd (click to enlarge):
We can also supply a replacement fitting kit for the rack if required
On a group test of 8 bootracks Practical Classics magazine awarded our CBR9005 rack their Best Buy award.
Their appraisal in full was: "The finish on the stylish Mille Miglia rack was superb, with even tubes and excellent assembly using countersunk slotted set-screws. Tubes are fixed to each other using shaped plastic washers, ensuring an even fit, and it is easy to nip any of them up if the rack slackens off, unlike riveted racks. The bars offer an excellent platform for hard and soft bags alike, and are useful for attatching bungees to. The support bar is a bit shallow. This rack has the feel of a well-made and lasting contender.