Part No |
Description |
Click to Enlarge |
Part Number
RET1 |
Radiator Expansion Tank / Header
Tank / Swirl Pot
- Polished alloy, 100% Tig welded
- Want to give your motor extra water & cooling
capacity? Every engine expels
coolant when it gets hot, - with a recovery tank in the system the
expelled fluid is drawn back in when the motor cools down. Also
increases overall coolant capacity - often required by tuned engines
-
The swirl function is
beneficial for any high performance engines cooling system. If any
localised boiling occurs it can cause unwanted air to become
trapped in the system. When a swirl pot is added it removes this air
before it can become a problem
- Kit is complete with mounting hardware
& brackets
- Supplied with 6 foot blue silicone hose
- Two extra caps supplied at 1.1bar pressure
- Measures 20cm x 6cm
- Beautifully made to enhance underbonnet
appearance
|
|
Part Number
RET2 |
Radiator Expansion Tank
- Manufactured from 304 non magnetic highly polished stainless,
100% tig welded
- Large size - Unit measures 33cm tall
- Top mounted stainless machined cap
- Supplied complete with fitting hardware & instructions
- Beautifully made to enhance under bonnet appearance
|
|
Part Numbers
Stainless BFS1
Red Anodise BFR1
Blue Anodise BFB1 |
Breather Filter
- Offers
high quality protection for all breathers & vents (eg rocker, carb etc)
- Ensures
air flow is not contaminated by foreign deposits which damage engine &
carbs
- Stainless top & bottom
cappings - adds that finishing
touch to competition & show engines
- Element easily cleanable (soak in petrol
then spray with WD40 or similar)
- Universal fitment with adjustable clamp supplied -
fitted in seconds
- Essential if removing emission equipment
(for more power)
- Measures 50 mm height x 50mm diameter
|
|
Part Number
OCT1 |
Oil Catch Tank With Breather
- Manufactured from 304 non magnetic highly
polished stainless, 100% tig welded
- Large capacity 800ml. Unit measures
9" tall (including filter) by 3" diameter, 1/2" ID pipe size
- Top mounted stainless housed filter for fast oil mist condensation
- Filter can be supplied in stainless or anodized red (as shown) or anodized
blue
- Oil level indicator
- Bottom drain
- No more oil-catch problems!
- Suitable for race & fast-road use
- Beautifully made oil catch can - will enhance under bonnet
appearance
|
Click the picture for more details |
|
|
Part Number TSB1 |
Tank Securing Bracket
A
rubber lined stainless clamp for bulkhead attatchment
Suits Radiator Expansion Tank RET2
(tank RET1 comes with its own mounting assembly) and Oil Catch Tank
OCT1
|
|
Part Number SBS1 |
Stainless Braided Hose
-
Stainless Braided PTFE lined woven hose to suit all our tanks
- Cut to
length required with serrated blade (eg hacksaw)
|
|
|
Oil Coolers
Etc |
|
Various Part Number Click Pic
|
Oil Cooler Radiator
- Manufactured from aircraft grade aluminium
- 100% tig welded
- Very light non-corrosive alloy
a |
|
Part Number OCMK1 |
Oil Cooler Mounting Kit
- Universal oil cooler mounting kit
manufactured by Mocul
- Lightweight anodised alloy
- Measures 280mm (11") x 39mm (1.5") x 0.5mm
|
|
Part Number
OCKJ1 |
Oil Cooler Kit
- Complete Oil Cooler Kit to suit universal fit
for all Japanese cars
- 19 row oil cooler
- Oil Filter adapter plate - CNC alloy anodised
- Stainless braided hoses 1 x 1.2 m , 1 x 1.4m
, 1 x 1.6m
|
|
Part Number MSP |
Magnetic Sump Plugs
|
|
|
Ignition
Components |
|
Part Number
DLB105 |
Lucas Sports Coil
- Higher voltage gives better,
fatter spark, resulting in added power, smoother response
and better fuel economy.
- Eliminates misfires,
reducing plug fouling
- 40,000 volt output
- Supplied complete with
bracket & fitting hardware.
- Fitted in seconds
- Suitable for all non-ballasted ignition systems
|
|
Part Number
CCC1 |
Chrome Coil Clamp
- Heavy chrome plate
- Universal for for all standard round coils
|
|
Part Number
CCS1 |
Stainless Coil Clamp
- Highly polished stainless
- Universal for for all standard round coils
|
|
Part Number
CCS2 |
Stainless Coil Clamp & Cover
- Highly polished stainless
- Universal for for all standard round coils
|
|
Various Part Number Click Pic
|
Magna-Spark Electronic Ignition Designed for Lucas distributors
(fits22D4 • 22D6 • 23D4 •
25D4 • 25D6 • 35D8 • 43D6 • 45D4 • 45D6 • 48D4 • 59D4)
Improved
performance
Easier starting
Increased fuel economy
Simple to fit and maintenance free
No permanent modifications
OEM quality components
Lifetime warranty
|
|
Various Part Number Click Pic |
Splitfire Spark Plugs
- The patented
SplitFire "V" design on the side electrode is instrumental
in helping to improve combustion efficiency. Because the
flame kernel is not blocked by the side electrode as in
other spark plugs, it can travel upward through the "v"
notch into the combustion chamber. Splitfire state that
higher voltage gives better,
fatter spark, resulting in added power, smoother response
and better fuel economy.
- 2 year warranty
|
|
|
Fuel, Air & Intake |
|
Part Number FFR1 |
Lifetime Fuel Filter
- Super cleans fuel to ensure top performance
- Captures dirt and grit as small as 40 microns
before they can damage carburettor
- Clear glass body lets you observe filtering action
- Chrome-plated end caps
- Quickly & easily dismantled without tools to clean
the element inside (wash with a little petrol)
- Suitable for all non-injected (ie on carbs) cars -
comes with a range of adapters to suit any size fuel line
|
|
Part Number SAF1 |
Stainless Sports Air Filter
-
Highly polished
stainless steel (looks like chrome but won't rust)
-
Fine foam filter
ensures perfect filtration with maximum performance
-
Waterproof
(unlike standard paper filters so can be used with or without airbox)
-
Foam element
easily cleanable (soak in petrol then spray with WD40)
-
Very cost
effective power improvement
-
Fitted in
minutes
-
Made in Britain
|
|
Part Number SURP1 |
SU Carb Ram Pipes
- Top Quality UK Made Anodised Alloy
- Superlightweigh - Bell Mouth weighs
under 1 gram
- To suit SU carbs 1 1/4 (HS2) 1 1/2
(HS4) 1 3/4 (HS6) 2" (HS8)
- Bell Mouth & Short measure 35mm,
Long Necks measure 75mm
|
|
Part Number WS3 - WS25 |
Wheel
Spacer Shims
- Sold
as a pair
-
Universal fit for all 4 or 5 stud hubs
- Best
quality lightweight alloy
-
Usually used on alloy wheels to sit flush with wheelarch and
bodywork, or to clear brakes & suspension
-
3mm (Part no WS3), 5mm (WS5) priced at £7.90 pair
-
10mm (WS10),
15mm (WS15), 25mm (WS25) priced at £15.80 pair
|
|
|
Convertible Hood Products |
|
Part Number
PWP30 |
Convertible Hood Plastic Window Cleaner
• |
Restores
transparency, removes cloudiness |
• |
Reduces
scratches and staining |
• |
Cleans
and conditions in minutes |
• |
Just
polish it on and polish it off! |
Performs just as well on similar jobs, eg helmet visors, boat
canopies, aero screens etc. Click the pic for further details
|
|
Part Numbers
HWSS
HWSL |
Hood Window Sheeting
- Clear Vybak rear hood window sheets.
- For effecting repair to or replacement of rear hood
windows.
|
|
|
Rear
Window Demister Kit |
|
Part Number RWD1 |
Rear Window Demister Kit 12
volt electric rear screen heater & demister for retro fitting to classics. Provides a
clear view over full width of screen. Supplied
complete with all necessary wires, connections & switch. Fitted in under
10
minutes.
|
|
|
Bootrack |
|
Various Part Number Click Pic |
Bootrack
- Available in alloy or stainless, with or without woodslats
- To fit a wide range of classics & moderns
|
|
|
Stainless Wiper Arms & Blades |
|
Part Numbers
SB50 - 4 |
Stainless Wiper Blades
- Best quality Stainless UK manufactured
- Unlike chrome stainless never rusts - we sell
a lot of these to boat owners
10" (5.2mm width supplied in
bayonet/push on fit to suit Classics, Cobras, Kit Cars etc) Part
No SB50
11" (5.2mm width supplied in
bayonet/push on fit to suit Classics, Cobras, Kit Cars etc)
Part No SB51
14" (7.2 mm width supplied with
range of fittings to suit all vehicles) Part No SB54
17" (7.2mm width supplied with
range of fittings to suit all vehicles) Part No SB54
|
|
Part Numbers
WS70/76
|
Stainless Wiper Arms
- Best quality Stainless UK manufactured
- Unlike chrome stainless never rusts - we sell
a lot of these to boat owners
- All priced at
11" Long 5.2mm
fitting to suit 9/16" shaft (Classic British/European vehicles from
1951 with Lucas boss) Part No W70
11" Long 7.2mm
fitting to suit 14.8mm shaft (modern type)
Part No W76
|
|
|
Washer Equipment |
|
Part Number
WJ1P
|
Twin Washer Jet
- Takes standard 3/16" (4mm) tubing, requires
5/8" (16mm) fitment hole
- Manufactured from stainless & chrome with
brass locator
|
|
Part Number
WM1P
|
Washer Motor
- Inline 12volt washer motor
- Takes standard 3/16" (4mm) tubing
|
|
Part Number
13H232 |
Washer Bottle & Stainless Bracket
- Complete assembly ready to fit -
bottle/cap/valve
- Takes standard 3/16" (4mm) tubing
- 6" tall, 2.75" diameter
- 1 pint capacity
|
|
|
Seatbelts |
|
Part Number
IB1/B (Black)
IB1/R (Red) |
Front Inertia Belt
- Specially designed for convertible & kit cars which do not have
the facility for an anchorage point at shoulder height
- Strap type anchor
- Supplied with fittings
- Available in black or red
|
|
Part Number
LB1 |
Rear Lap Belt
- Designed for retro fitting to classics without rear seatbelts
- Strap type anchor
- Supplied with fittings
- Black only
|
|
|
Securon Harnesses |
|
HAR1 (Black)
HAR1 (Blue)
HAR1(Red) |
3 Point Harness
- E-Approved (SVA compliant)
- Available in black, red, blue
- Snap hook anchorages
- Twin button release
|
|
HAR2 (Black)
HAR2 (Blue)
HAR2(Red) |
4 Point Harness
- E-Approved (SVA compliant)
- Available in black, red, blue
- Snap hook anchorages
- Twin button release
|
|
HAR4 (Black)
HAR4 (Blue)
HAR4 (Red) |
6 Point Harness
- FIA Approved
- Available in black, red, blue
- Snap hook anchorages
- Turn lever release
|
|
|
Fire
Extinguishers |
|
Various Part Number Click Pic |
Hand Held Fire Extinguishers
- BESN3 Approved
- Categories A, B, C
- Supplied with mounting brackets
- Suitable for cars & boats
|
|